NADE Bench pH Meter PHSJ-3F (-2.00~20.00, 0.01pH)

1. LCD display, English operation system for easy use

2. All-round GLP operation design and self-inspection function

3. Automatic/manual temperature compensation in wide range, self-calibration, self-calculation of electrode percentage of theoretical slope

4. Test results can be stored, deleted, viewed and printed. The amount of data can reach the maximum of 200 sets.

5. Five types of pH buffer solution can be chosen to conduct automatic calibration (one point or two points)

6. It has RS-232 interface, and it can be connected to TP-16 printer. Also, the interface can be used to connect data collecting software and computer.

7. It can be used to measure pH value of ultrapure water, pure water and boiling water by adjusting equipotential point and choosing specific electrode.

8. It is equipped with E-201-C combined electrode and T-818-B-6 temperature electrode.

Measuring range	PH	-2.00~20.00
	mV	-1999~1999
	Temperature	-5.0~135.0°c
Resolution	PH	0.01
	mV	1
	Temperature	0.1°c
Accuracy	PH	+/- 0.01Ph +/-1bit
	mV	+/- 0.1%(FS)
	Temperature	+/-0.3 °c +/- 1bit
Input impedance	>=1x1012 Ω
Stability	(+/-0.01pH+/- 1byte)/3h
Range of temperature compensation	Automatic/manual (-5.0~135.0) °c
Power	DC power (9V DC, 500Ma, inside positive and outside negative)
Dimension	280x210x90mm
Net Weight	1KG
Gross Weight	2.5kg
Package Size	340X270X280mm