You are here: Home / Products / Physical Instruments / Bituminous Equipments / Bitumen Softening Point Tester / SYD-0610 Asphalt Rolling Thin Film Oven


Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

SYD-0610 Asphalt Rolling Thin Film Oven

Total power consumption: ≤2.6kW
Working temperature: 163℃
Rotating speed of turn plate: (15r±0.2r)/min
Air flow rate: (4000±200)mL /min
  • SYD-0610

  • AC(220±10%)V, 50Hz

  • 1

  • 1 year

  • China

Product Description

SYD-0610 P1

This instrument is designed and made as per industrial standard T 0610-2011 and ASTM D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt in JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine mass loss of highway asphalt rolling thin film after heating, and the change of penetration, viscosity, ductility and breaking point of asphalt residue after the thin film has been heated, so as to estimate the aging performance of bitumen.


1. This Oven is composed of electric control component, working oven and mechanical drive. An illuminating light is equipped in the oven for convenient observation.
2. There is an air compressor in the oven to supply the air needed for the test. The air can be controlled by a flowmeter on the panel.
3. It adopts high precise temperature controller which can meet test requirements.




Power supply

AC(220±10%)V, 50Hz

Total power consumption


Working temperature


Temperature control precision


Rotating speed of turn plate

(15±0.2) r /min

Air flow rate

(4000±200)mL /min

Timing unit

Alert at 85 min

Ambient temperature


Relative humidity