Home/Products/Nade Multi-channel Positive Pressure Solid-Phase Extractor XT-SPE-I
Nade Multi-channel Positive Pressure Solid-Phase Extractor XT-SPE-I
Nade Multi-channel Positive Pressure Solid-Phase Extractor XT-SPE-I
Size: XT-SPE-I
Note:
Category: Sample processing equipment
 
Detailed Product Description
 
1.extraction device
2.A sample pretreatment technique
3.Convenient, safe and efficient
4.physical extraction process
Parameter:
1.Extraction column volume: 1mL, 3mL, 6mL, 10mL or 15mL.
2.Working gas:  nitrogen or compressed air.
3.Filter: 10μm online air filter.
4.Maximum working pressure: 0.5MPa.
 
Description:
1.Solid-phase extraction (SPE) is a sample pretreatment technique that swiftly developed in recent years. SPE is convenient, safe and efficient; also its use level of organic solvent is small. SPE is used for sample separate, purification and concentration; compare with LLE, the SPE could increase the percent recovery, separate interfering component more efficiently and reduce the pretreatment time; also the operation is simpler, save more time and labour. SPE is widely used in the field of medicine, food, environment, commodity inspection chemical industry.
 
2.SPE is a physical extraction process including liquid phase and solid phase. It makes use of the theory of preferential adsorption and selective elution, lets liquid sample go through a sorbent and remain a part, and then remove the impurity by proper solvent, elute the sample by a bit solvent at last, which the achieve the purpose of rapid separate purification and concentration.
 
 3.The XT-SPE-I Multi-channel Positive Pressure Solid-Phase Extractor developed by our company handles 24 samples at the same time; flow speed of each sample can be adjusted by vernier knob so that the flow rate of each extraction column shall be uniform. Innovative tandem connector connects two extraction columns for tandem extraction. The application of these new designs makes SPE more reasonable and efficient.
 
 Capability feature
1.Handle 24 samples at the same time; provide same pressure for each extraction column.
2.Unique vernier knob makes flow rate of each extraction column is adjustable and won’t interfere each other.
3.Extraction column volume includes 1mL, 3mL, 6mL, 10mL and 15mL. Simply changing the strong back of the column can switch among different volume.
4. Innovative tandem connector for tandem extraction which solves the problem that extraction column volume is insufficient when lots of sorbent or several kinds of sorbent are needed.
5. Air-powered raising platform controls raise/lower of the rack and supply good gas tightness.
6. May use compressed air or nitrogen. Equipped with 10μm filte